Hardox There are no products in this category.

Subcategories

  • Hardox 400

    Hardox 400 is a wear resistant steel with a hardness of 400 HBW.

    APPLICATIONS

    Hardox 400 is the wear resistant steel for combined payload and service life solutions. 

    DIMENSIONS

    Hardox 400 is supplied in thicknesses of 3 - 130mm. For dimensions with width < or = 1600mm and thickness 3-6mm preferred widths are 1500 or 1600 mm, delivered as cut-to-length in as rolled surface condition with mill edge as standard. Cut edges is on option. Widths up to 3300 mm  are availbale.

    HEAT TREATMENTS AND FABRICATION

    Hardox 400 has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition can not be retained after exposure to service or preheating temperatures in excess of 250ºC (480ºF).Hardox in not intended for further heat treatment. Hardox 400 is not suited for pickling.

    For further information or quotation send an email to info@herramentalia.com

    or call us to +34 91 669 82 34

  • Hardox 450

    Hardox 450 is an abrasion resistant steel with a nominal hardness of 450 HBW. Typical applications are components and structures subject to wear. 

    Hardox 450 is available in thickness of 3 - 130mm. Hardox 450 Tuf is available in thickness of 3 - 40mm. Both grades are available in widths up to 3350mm and lenghts up to 14630mm.For widths < or = 1600 mm and thicknesses between 3 and 6mm, the preferred widths are 1500 or 1600mm. For thickness over 80,, the preferred width is 1650mm 

    Hardox 45 and Hardox 450 Tuf are nos intended for further heat tratment. Mechanical properties are achieved by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 250ºC.

    For further information or quotation send an email to info@herramentalia.com

    or call us to +34 91 669 82 34